View 1SMA40CAT3_421206.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1SMA10CAT3 Series 400 Watt Peak Power Zener Transient Voltage Suppressors
Bidirectional*
The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SMA series is supplied in ON Semiconductor's exclusive, cost-effective, highly reliable SurmeticTM package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications.
Specification Features http://onsemi.com
PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS 10-78 V VR 400 W PEAK POWER
* * * * * * * * *
Working Peak Reverse Voltage Range - 10 V to 78 V Standard Zener Breakdown Voltage Range - 11.7 V to 91.3 V Peak Power - 400 Watts @ 1 ms ESD Rating of Class 3 (> 16 kV) per Human Body Model Response Time is Typically < 1 ns Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package Pb-Free Packages are Available
SMA CASE 403B PLASTIC
Mechanical Characteristics: CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant and leads are
MARKING DIAGRAM
readily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
xxC LLYWW
260C for 10 Seconds
POLARITY: Cathode polarity notch does not indicate polarity MOUNTING POSITION: Any
xxC LL Y WW = Specific Device Code = (See Table Next Page) = Assembly Location = Year = Work Week
ORDERING INFORMATION
Device* 1SMAxxCAT3 1SMAxxCAT3G Package SMA SMA (Pb-Free) Shipping 5000/Tape & Reel 5000/Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
Individual devices are listed on page 3 of this data sheet.
*The "T3" suffix refers to a 13 inch reel.
(c) Semiconductor Components Industries, LLC, 2004
1
April, 2004 - Rev. 6
Publication Order Number: 1SMA10CAT3/D
1SMA10CAT3 Series
MAXIMUM RATINGS
Rating Peak Power Dissipation (Note 1) @ TL = 25C, Pulse Width = 1 ms DC Power Dissipation @ TL = 75C Measured Zero Lead Length (Note 2) Derate Above 75C Thermal Resistance from Junction-to-Lead DC Power Dissipation (Note 3) @ TA = 25C Derate Above 25C Thermal Resistance from Junction-to-Ambient Operating and Storage Temperature Range Symbol PPK PD Value 400 1.5 20 50 0.5 4.0 250 -65 to +150 Unit W W mW/C C/W W mW/C C/W C
RqJL PD RqJA TJ, Tstg
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. 10 X 1000 ms, non-repetitive 2. 1 square copper pad, FR-4 board 3. FR-4 board, using ON Semiconductor minimum recommended footprint, as shown in 403B case outline dimensions spec. *Please see 1SMA5.0AT3 to 1SMA78AT3 for Unidirectional devices.
ELECTRICAL CHARACTERISTICS
(TA = 25C unless otherwise noted) Symbol IPP VC VRWM IR VBR IT Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current IPP IT VC VBR VRWM IR IR VRWM VBR VC IT I IPP
V
Bi-Directional TVS
http://onsemi.com
2
1SMA10CAT3 Series
ELECTRICAL CHARACTERISTICS
VRWM (Note 4) Volts 10 11 12 13 14 15 16 18 20 22 24 26 28 30 33 36 40 43 48 51 54 58 60 64 70 78 Breakdown Voltage IR @ VRWM mA 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 VBR (Volts) (Note 5) Min 11.1 12.2 13.3 14.4 15.6 16.7 17.8 20 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 53.3 56.7 60 64.4 66.7 71.1 77.8 86.7 Nom 11.69 12.84 14.00 15.16 16.42 17.58 18.74 21.06 23.37 25.69 28.11 30.42 32.74 35.06 38.63 42.11 46.74 50.32 56.11 59.69 63.16 67.79 70.21 74.84 81.90 91.27 Max 12.27 13.48 14.70 15.92 17.24 18.46 19.67 22.11 24.54 26.97 29.51 31.94 34.37 36.81 40.56 44.21 49.07 52.83 58.91 62.67 66.32 71.18 73.72 78.58 85.99 95.83 @ IT mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 VC @ IPP (Note 6) VC Volts 17.0 18.2 19.9 21.5 23.2 24.4 26.0 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 77.4 82.4 87.1 93.6 96.8 103 113 126 IPP Amps 23.5 22.0 20.1 18.6 17.2 16.4 15.4 13.7 12.3 11.3 10.3 9.5 8.8 8.3 7.5 6.9 6.2 5.8 5.2 4.9 4.6 4.3 4.1 3.9 3.5 3.2
Device 1SMA10CAT3 1SMA11CAT3 1SMA12CAT3 1SMA13CAT3, G* 1SMA14CAT3 1SMA15CAT3, G* 1SMA16CAT3, G* 1SMA18CAT3 1SMA20CAT3, G* 1SMA22CAT3 1SMA24CAT3, G* 1SMA26CAT3, G* 1SMA28CAT3 1SMA30CAT3 1SMA33CAT3, G* 1SMA36CAT3, G* 1SMA40CAT3 1SMA43CAT3 1SMA48CAT3 1SMA51CAT3 1SMA54CAT3 1SMA58CAT3, G* 1SMA60CAT3, G* 1SMA64CAT3 1SMA70CAT3 1SMA78CAT3
Device Marking QXC QZC REC RGC RKC RMC RPC RTC RVC RXC RZC SEC SGC SKC SMC SPC SRC STC SXC SZC TEC TGC TKC TMC TPC TTC
4. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level 5. VBR measured at pulse test current IT at an ambient temperature of 25C 6. Surge current waveform per Figure 2 and derate per Figure 3 * The "G" suffix indicates Pb-Free package available.
http://onsemi.com
3
1SMA10CAT3 Series
RATING AND TYPICAL CHARACTERISTIC CURVES
100 Ippm, PEAK PULSE CURRENT (%) NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 2. TA = 25C
120 = 10 ms 100 80 60 40 20 0 PEAK VALUE Ippm
Ppk , PEAK POWER (kW)
TA = 25C PW (ID) IS DEFINED AS THE POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF Ipp.
10
HALF VALUE - Ipp/2 10/1000 ms WAVEFORM AS DEFINED BY R.E.A. td 0 1 2 t, TIME (ms) 3 4 5
1
0.1
10-4
0.001
0.01 0.1 tP, PULSE WIDTH (ms)
1
10
Figure 1. Pulse Rating Curve
Figure 2. Pulse Waveform
120 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 80 60 40 20 0 10 x 1000 WAVEFORM AS DEFINED BY R.E.A.
0
40
80 120 160 TA, AMBIENT TEMPERATURE (C)
200
Figure 3. Pulse Derating Curve
http://onsemi.com
4
1SMA10CAT3 Series
OUTLINE DIMENSIONS
SMA CASE 403B-02 ISSUE C
S A
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 403B-01 OBSOLETE, NEW STANDARD 403B-02. INCHES MIN MAX 0.160 0.180 0.090 0.115 0.075 0.095 0.050 0.064 0.002 0.006 0.006 0.016 0.030 0.060 0.190 0.220 MILLIMETERS MIN MAX 4.06 4.57 2.29 2.92 1.91 2.41 1.27 1.63 0.05 0.15 0.15 0.41 0.76 1.52 4.83 5.59
D
B
POLARITY INDICATOR OPTIONAL AS NEEDED
DIM A B C D H J K S
C
K
J
H
SOLDERING FOOTPRINT*
4.0 0.157
2.0 0.0787
2.0 0.0787
SCALE 8:1 mm inches
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
5
1SMA10CAT3 Series
SURMETIC is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.
http://onsemi.com
6
1SMA10CAT3/D

▲Up To Search▲

Price & Availability of 1SMA40CAT3

	To Download 1SMA40CAT3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .